Internship | Delft

FPGA Haptic Module

Our people make the difference, do you share our vision of a future of spatial digital interactions based on touch? Then join our team.  

SenseGlove for Virtual Training

n this project, you will build a haptics module using an FPGA board. Haptics modules are used to control vibrotactile feedback on SenseGloves. There is freedom to the implementation, but the haptic module should have at least a standard interface (I2C or SPI) and be capable of generating various waveform and driving multiple haptic channels at the same time.

  • Target student: CS / EE BSc / MSc
  • Basic understanding of Verilog
  • Basic understanding of Embedded Electronics
  • (Plus) Experience with Audio Electronics

If you are a talented and ambitious MSc or BSc student in your education’s last two years, with a relevant skill set, please apply using the form below. Make sure you awe us with your previous projects and your resume.

This project is available from Q1 of 2021.

What SenseGlove has to offer

Achieve your research goals with SenseGlove. Our extensive plug-and-play Software Development Kit (SDK) for the Unity Engine allows the creation of haptic interactions in VR with little to no coding. For more in-depth research like telerobotics, SenseGlove offers a native C++ SDK that provides the ultimate freedom in data collection. Coupled with per-phalange/26 DoF tracking, our hardware and software give you an unmatched research experience.

What SenseGlove has to offer

Apply for

FPGA Haptic Module

Tell us what makes you special and why we should hire you and we’ll let you know if we’re interested in an introductory meeting.

  • Accepted file types: pdf, docx, doc, jpg, jpeg, png.
  • This field is for validation purposes and should be left unchanged.